Cisco Prisma II bdr Dig Rev 2 1 Dual Mux Sys for High Density Installations 설치 가이드
78-715193-01 Rev C
Operation Using LCI
4-19
Configuring the bdr Receive Processor,
Continued
Configuring Parameters
To configure the parameters, follow these steps.
1.
Access the Device Details window.
2.
Under Controls, double-click the parameter you want to configure.
Result: The Change Value dialog box displays. The graphic below shows the
Result: The Change Value dialog box displays. The graphic below shows the
dialog box for the Redundant Mode parameter of the bdr Receive Processor.
3.
Depending on the parameter you chose, select or type a new value.
4.
Click Execute.
Result: The new value displays next to the parameter.
Result: The new value displays next to the parameter.