Cisco Headend System Release 2.7 설치 가이드
Chapter 1 Install the InView Client 3.6 Software
8
4019969 Rev B
Edit the System Files
During the installation of the InView application, the following files are saved to the
DNCS in the bin directories.
Important: Because these files accumulate with each revision of software, they will
Important: Because these files accumulate with each revision of software, they will
never be overwritten. Therefore, if you are upgrading to a new version of InView
and a problem exists, you can reload the previous version of software.
InView_3.6_d.ptv
InView_3.6_p.ptv: this file overwrites the InView.ptv file
InView_3.6_template.cfg: used to create a configuration file if you are installing
InView for the first time
Verifying Files in the InView Directory
Verify that the InView.ptv, HTMLEngine.ptv, and inview.cfg files are in the
export/home/dncs/apps/InView directory.
1 Open an xterm window.
2 Type cd /export/home/dncs/apps.
3 Type ls. The following directories should be listed and should each contain their
1 Open an xterm window.
2 Type cd /export/home/dncs/apps.
3 Type ls. The following directories should be listed and should each contain their
respective .ptv file.
InView
HTMLEngine
eVOD
Important: If you are installing the InView application for the first time, the
Important: If you are installing the InView application for the first time, the
inview.cfg file will not be present. You will need to build your own
configuration file using the InView_3.6_template.cfg file. Go to Building Your
Configuration File (on page 9) for details.
4 Are the files in the list?
If yes, access a text editor to open and edit the inview.cfg file using the
parameters in Reviewing Configuration Parameters (on page 9).
If no, repeat the Installing the Software on the DNCS (on page 6) procedures.
If the files are not in the list after repeating the procedure, call Cisco Services
for assistance.