Cisco Headend Digital Broadband Delivery System 사용자 가이드
2-4
Audio Options
4002178 Rev C
Select a Preferred Audio Language for Digital Services,
Continued
Selecting the Audio Language for Your Subscribers
If you want your subscribers to select the audio language for digital services, see
Allowing Your Subscribers to Select a Preferred Language for Digital Services,
earlier in this section.
To select the preferred audio language for all of your subscribers, complete the
To select the preferred audio language for all of your subscribers, complete the
following steps. Following this procedure will cause all of your subscribers’ set-tops
to default to the same audio language for digital services. However, subscribers can
still use the Quick Settings menu to switch to an alternate language if it is available
for the service.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Make sure the option for Language: Audio is not selected.
Result: When this field is not selected, subscribers cannot change the audio
Result: When this field is not selected, subscribers cannot change the audio
language. Instead, you must select the language for the subscriber.
6.
Select the Base Application tab to select the audio language for all
subscribers.
Result: The Base Application tab appears in the forefront.
Result: The Base Application tab appears in the forefront.
7.
For the Audio Language option, select the language that you want all your
subscribers to use.
8.
Click Save.
Result: All of your subscribers’ set-tops will now use the language you
Result: All of your subscribers’ set-tops will now use the language you
selected.
9.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
10.
Click File and Close to close the DHCT Configure prompt.