Cisco Headend System Release 2.7 관리 매뉴얼
Decide Binding Type
4024836 Rev D
25
Note: This value cannot be changed from the Server Configuration window.
To change this value, you must use the modCCardStagingLimit script. For
assistance using this script, refer to Change the CableCARD Module Staging
Limit (part number 4020737).
5 Click Save to save these parameters.
6 Click the CableCARD Summary link at the top of the page. The CableCARD
6 Click the CableCARD Summary link at the top of the page. The CableCARD
Summary screen opens.
7 Click MMI Screen Format. The Configure MMI Screen Data screen opens.
8 Make sure that the Display MMI for Bi-Directional Device is not activated (that
a checkmark does not display in the box).
9 Select the Network Failure Operation - Display CP MMI option you prefer:
Unchecked (disabled, default): The host always uses the value in the
Bidirectional Timeout field to determine when to display the MMI CP
screen.
Checked (enabled): The host displays the MMI CP screen if no network boot
occurs.