Cisco Headend System Release 2.7 관리 매뉴얼
Chapter 3 Staging SSC DHCTs
84
4024836 Rev D
SSC CableCARD Module Download
The DHCT pauses before it launches the CableCARD staging process. The table in
The DHCT pauses before it launches the CableCARD staging process. The table in
this section describes the screen displays during the CableCARD staging process.
Important: The alphanumeric LED indicators in the table in this section display only
Important: The alphanumeric LED indicators in the table in this section display only
if you have installed software that includes one of the following numbers in the rom
name:
0802 (or later) — 4250HDC
0902 (or later) — 8300HDC
If you are using an earlier release than those listed above, you must connect a TV
monitor to the DHCT to monitor the CableCARD module download.
Stage Alphanumeric
LED Indicator
TV Monitor
Description
1
and then
repeatedly through
stage 8
The CableCARD module is preparing to
start its download.
2
This screen appears while the CableCARD
module searches for the frequency of a
QAM with a valid CVT table for that
CableCARD module.
3
This screen appears after the CableCARD
module has searched for, found, and
locked in the frequency of a QAM with a
valid CVT table for that CableCARD
module.
4
The download progress is displayed as a
percentage. This screen updates once every
minute or so.
5
After the CableCARD module download is
complete, the screen indicates that the OS
is erasing the existing flash memory of the
CableCARD module.
6
After the CableCARD module download is
complete, the screen indicates that the OS
is being installed into flash memory of the
CableCARD module.