Cisco Headend Digital Broadband Delivery System 관리 매뉴얼
About This Guide
vi
4024836 Rev D
Scope
This document provides the procedures to properly stage SSC DHCTs with System
Release (SR) 4.3 and later. If your system uses SR 4.2.1 or earlier, refer to the Separable
Security Host Staging Guide for System Release 4.2.1 and Earlier (part number 736107).
This document is an addendum to the Explorer Digital Home Communications Terminal
This document is an addendum to the Explorer Digital Home Communications Terminal
Staging Guide (part number 734375).
Before you begin to stage DHCTs, follow the recommendations in the first five
Before you begin to stage DHCTs, follow the recommendations in the first five
chapters of the Explorer Digital Home Communications Terminal Staging Guide (part
number 734375) regarding the staging process, staging preparations, staging area
considerations, obtaining and loading EMM data, and staging non-SSC DHCTs.
Also, make sure to follow the recommendations in Optimize Your System
Performance for Downloads and Staging (on page 41) to improve the speed and
performance of the initial staging process.
Audience
This guide is written for staging area personnel responsible for staging SSC DHCTs
and CableCARD modules, DHCT/CableCARD module installation personnel, and
system operators of the Digital Network Control System (DNCS).
Document Version
This is the fourth formal release of this document. In addition to minor text and
graphic changes, the following table provides the technical changes to this
document.
Description
See Topic
Added new error codes for CDL as defined
in OCAP host specification and in the host
MIB
CDL Error Codes (on page 157)
Added new CableCARD module
validation status codes from the
CableCARD module copy protection
specification
CableCARD Module Validation Status
Codes (on page 163)
Added new host-CableCARD module
interface errors as defined in the CCIF
specification
Host - CableCARD Module Interface Errors
(on page 167)