Cisco Headend System Release 2.7 설치 가이드
Chapter 3 SR 2.7/3.7/4.2 SP4 Installation Procedures
62
4042389 Rev A
Restarting the Application Server or MAS Server
This section provides procedures for restarting either a Cisco Application Server,
MAS, or third-party server. Choose the procedure that pertains to your system.
MAS, or third-party server. Choose the procedure that pertains to your system.
Restarting the Application Server at SARA Sites
1 Press the middle mouse button on the Application Server and select App Serv
1 Press the middle mouse button on the Application Server and select App Serv
Start.
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
open a remote shell on the Application Server.
b Proceed to step 2 and run the commands from the remote shell.
2 From an xterm window on the Application Server, type appControl and then
press Enter. The Applications Control window opens.
3 Select option 2 on the Applications Control window. The system displays a list of
Application Server processes and their current status.
Note: The system updates the display periodically, or you can press Enter to
force an update.
Note: The system updates the display periodically, or you can press Enter to
force an update.
4 When the Application Control window indicates that the current state (Curr Stt)
of each process is running, follow the on-screen instructions to close the
Applications Control window.
Applications Control window.
Preparing the Aptiv Application Server for the Service Pack
Refer to Aptiv Technical Note Number 41. Complete steps 6 through 14 to restart
the Aptiv Application Server after the upgrade is complete.
the Aptiv Application Server after the upgrade is complete.
Note: Contact Aptiv Digital for the latest copy of the technical note.
Restarting the Time Warner Mystro Application Server
If necessary, refer to the documents supplied by Mystro to restart the MDN.