Cisco Headend System Release 2.7 설치 가이드
4040195 Rev B
13
Activate the Solaris Patch Set
Activate the Solaris Patch Set
After you have installed the Solaris patch set, follow these instructions to activate the
patch.
patch.
Important: These instructions should be completed inside a maintenance window.
1 From a dncs xterm window on the Application Server, type appStop and press
1 From a dncs xterm window on the Application Server, type appStop and press
Enter. The application server processes stop.
2 From a dncs xterm window on the DNCS, type dncsStop and press Enter to
stop processes on the DNCS.
3 When all processes are stopped, type dncsKill and press Enter.
4 From a root xterm window on the Application Server, type shutdown -y -g0
4 From a root xterm window on the Application Server, type shutdown -y -g0
-i0
and press Enter. The Application Server shuts down to an OK prompt.
5 From a root xterm window on the DNCS, type /etc/init.d/informix stop
and press Enter to stop Informix.
6 Type ps –aef | grep oninit and press Enter to verify that Informix has
stopped. The output should be similar to the following:
root 18735 18695 0 09:55:04 pts/3 0:00 grep oninit
7 From a root xterm window, type svcadm -v disable -s cron and press
Enter to disable cron jobs on the DNCS.
8 In the root window, boot from the Solaris patch disk.
If the CD auto-mounted, type /cdrom/cdrom/bootd7 and press Enter.
If you manually mounted the CD, type /cdrom/bootd7 and press Enter.
Notes:
Several errors appear during the reboot. Ignore these errors as they will
disappear after the next reboot.
disappear after the next reboot.
If the CD drive opens during the reboot, close the CD drive.
9 When the CDE window appears, log on as dncs user.
10 Open an xterm window and change to root user (
10 Open an xterm window and change to root user (
su -
).