Cisco Headend Digital Broadband Delivery System 릴리즈 노트
Chapter 1 Introducing QAM Software Version 2.4
4
4003389 Rev B
Implemented CRs
Introduction
The following matrix lists the implemented CRs addressed by QAM software
version 2.4. Additionally, this matrix lists the following attributes associated with the
implemented CRs:
version 2.4. Additionally, this matrix lists the following attributes associated with the
implemented CRs:
The CR number
A brief description of the CR appears in the Subscriber column if the subscriber
is affected by the CR
is affected by the CR
A brief description of the CR appears in the Cable Service Provider column if the
cable service provider is affected by the CR
cable service provider is affected by the CR
The process most affected by the CR
Note: If you would like to review these CRs in more detail, go to Want to Know
More? (on page 5).
More? (on page 5).
Quick Reference Matrix for CRs
CR Number
Subscriber
Cable Service Provider
Process Affected
54738
Temporary loss of
services
services
Corrected an occasional
issue where inserted
program specific
information (PSI) packets
caused the PowerKEY
CAQAM to reboot when
the Open Cable
Compliant option is
selected, or in other
configurations when the
SI Insert Rate is set lower
than recommended.
issue where inserted
program specific
information (PSI) packets
caused the PowerKEY
CAQAM to reboot when
the Open Cable
Compliant option is
selected, or in other
configurations when the
SI Insert Rate is set lower
than recommended.
CAQAM
Application and
PowerKEY
Application and
PowerKEY