Cisco Headend System Release 2.7 릴리즈 노트
Chapter 1 Why Choose System Release 3.8?
4
4019365 Rev B
Quick Path: DNCS Administrative Console > DNCS tab > Home Element
Provisioning tab > Image > Downloadable Files tab > File > New
Provisioning tab > Image > Downloadable Files tab > File > New
Counter-Based Autobinding
This feature allows CableCARD modules to bind to hosts based on a pre-defined
counter. When the counter expires, the DNCS does not allow the CableCARD
module to bind to any other hosts.
counter. When the counter expires, the DNCS does not allow the CableCARD
module to bind to any other hosts.
The Counterbased Autobinding feature can help you prevent the unauthorized use
of CableCARD modules. This feature tracks each time a CableCARD module and
host are bound with the autobinding method, and prevents a module from
autobinding with a host whenever the module exceeds the maximum number of
host autobindings set for your system.
of CableCARD modules. This feature tracks each time a CableCARD module and
host are bound with the autobinding method, and prevents a module from
autobinding with a host whenever the module exceeds the maximum number of
host autobindings set for your system.
Important: When a module and host are bound with a billing transaction, combo-
binding, or manual binding method, the host and module are allowed to bind even if
the module has exceeded the maximum number of host bindings for the system.
Binding is prevented only when a module has exceeded the maximum number of
automatic bindings with a host.
binding, or manual binding method, the host and module are allowed to bind even if
the module has exceeded the maximum number of host bindings for the system.
Binding is prevented only when a module has exceeded the maximum number of
automatic bindings with a host.
The default setting allows an unlimited number of module and host autobindings.
To change the default setting and limit the number of module and host
autobindings, customize the Maximum Host Change Count Allowed setting when
you configure the CableCARD server.
To change the default setting and limit the number of module and host
autobindings, customize the Maximum Host Change Count Allowed setting when
you configure the CableCARD server.