Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 설치 가이드

 

xiv 

4039132 Rev B 

 

CAUTION: 
Installation of this equipment in a rack should be such that the amount of 
airflow required for safe operation of this equipment is not compromised. 

 

Only install this equipment in a humidity- and temperature-controlled environment 
that meets the requirements given in this equipment‟s technical specifications. 

 

CAUTION: 
If installed in a closed or multi-unit rack assembly, the operating ambient 
temperature of the rack environment may be greater than room ambient 
temperature.  Therefore, install this equipment in an environment compatible 
with the manufacturer’s maximum rated ambient temperature. 

 

When moving a cart that contains this equipment, check for any of the following 
possible hazards: 

 

 

WARNING: 
Avoid personal injury and damage to this equipment! Move any equipment 
and cart combination with care. Quick stops, excessive force, and uneven 
surfaces may cause this equipment and cart to overturn. 

 

Use caution when moving this equipment/cart combination to avoid injury from 
tip-over. 

 

If the cart does not move easily, this condition may indicate obstructions or 
cables that may need to be disconnected before moving this equipment to 
another location. 

 

Avoid quick stops and starts when moving the cart. 

 

Check for uneven floor surfaces such as cracks or cables and cords. 

 

This section provides instructions for verifying that the equipment is properly 
grounded. 

This equipment may be equipped with either a 3-terminal (grounding-type) safety 
plug or a 2-terminal (polarized) safety plug. The wide blade or the third terminal is 
provided for safety. Do not defeat the safety purpose of the grounding-type or 
polarized safety plug.