Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 사용자 가이드
Provisioning tab.
6.
Click Image. The Image List window opens.
7.
On the Image List window, click the DHCT Downloads tab. The Image List window updates to display
the different devices that have already been configured for a CVT download.
8.
In the DHCT Type column, select the device type that will receive the new software where the value in
the Group column is labeled Default.
9.
Click File > Delete.
10.
Repeat steps 8 and 9 for each device type that is receiving new software.
11.
In an xterm window on the DNCS, type listCVT and press Enter. The listCVT report displays. Look for
unused files in the report.
12.
On the Image List window, select the Downloadable Files tab and compare the list of files displayed
with the list of unused files listed in the listCVT report.
13.
Select any unused file on the Downloadable Files tab.
14.
Click File > Delete.
Note: The DNCS will not allow you to delete a file that is already associated with a download.
15.
Repeat steps 13 and 14 until you have deleted all unused files.
16.
On the Image List window, select the DHCT Downloads tab.
17.
Click File > New. The Set Up DHCT Download window opens.
18.
Complete the following steps to configure the Set Up DHCT Download window for the test download.
Click the DHCT Type arrow and select a device that needs to receive the new software.
Click the Group arrow and select Default.
Click the File Description arrow and select the file that corresponds to the new application
platform release that you want to download.
Note: Unless you have old files or test versions still posted, there should be only one choice.
Click the Download Scheduling arrow and select one of the following, based on the device
type:
DHCTs: Select either Normal or Immediate. A Normal download does not begin until
the DHCT is turned off.
CableCARD modules: Select Immediate.
19.
Click Save. The Association Verification window opens.
20.
Verify that the DHCT Type, Group, and Image File versions shown on the Association Verification
window are correct.
21.
Configure the following fields on the Association Verification window:
Are you SURE you want to do this?: Type yes.
Enter your name: Type the name (in lowercase letters) you provided to Cisco Services when
you requested the secure GUI password.
Password: Type the password you received from Cisco Services.
22.
Click OK. The system schedules the software download according to the schedule you configured
earlier in this section.
23.
Repeat steps 17 through 22 for each device type that you want to receive the software using the CVT
method.
Page 439