Cisco Cisco 1 GHz GainMaker Amplifier 데이터 시트
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 7
Ordering Information
The Cisco GainMaker High Output High Gain Balanced Triple Amplifier is available in a wide variety of
configurations. The desired configuration is “built” by accessing the Cisco Commerce Workspace tool at
configurations. The desired configuration is “built” by accessing the Cisco Commerce Workspace tool at
. The user specifies the new Assemble To Order (ATO) Product
ID for the Cisco GainMaker System Amplifier High Gain Balanced Triple
“GMSA-HGBT” and the tool steps through
the available options. Services may also be selected during this process. Once all the desired options are selected,
the configuration and price are displayed. When the “Done” radio button is clicked, the configuration can be
the configuration and price are displayed. When the “Done” radio button is clicked, the configuration can be
exported and saved for future use or immediate ordering.
This page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or System Engineer to determine the best configuration for
your particular application.
The following Required Accessories must be ordered separately:
Required Accessories
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
● 1 required for forward input
● 1 required for AGC, if applicable
● 1 required for AGC, if applicable
*
● 4 required for reverse (3 input, 1 output)
*
To determine AGC pad value, subtract 34 dB from the design value main port RF output level at the
AGC pilot frequency
589693 (0 dB) sequentially thru
589734 (20.5 dB)
589734 (20.5 dB)
Plug-in Forward Cable Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
● 1 required for forward input
4007228 (0 dB) sequentially thru
4007248 (30 dB)
4007248 (30 dB)
Plug-in Reverse Cable Equalizer - Available in 1 dB steps from 0 to 12 dB at 85 MHz
● 1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and 4036769 (1 dB)
sequentially thru 4036780 (12 dB)
sequentially thru 4036780 (12 dB)
The following Optional Accessories may be ordered separately:
Optional Accessories
Part Number
24V Power Supply for GainMaker High Output HGBT
4026157
230 V AC Crowbar Surge Protector (plug-in, one per station)
4007682
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt
opposite that of equalizers). Use in place of forward input EQ as
needed to maintain proper output tilt in short spaced locations.
Available in approx. 1.6 dB “cable equivalent” steps from 1.6 to 16.2
dB.
opposite that of equalizers). Use in place of forward input EQ as
needed to maintain proper output tilt in short spaced locations.
Available in approx. 1.6 dB “cable equivalent” steps from 1.6 to 16.2
dB.
4007486 (1.6 dB) sequentially thru 4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder -
*
see GainMaker Status Monitoring
Transponder Data Sheet
Refer to the Cisco GainMaker Status Monitoring Transponder Data
Sheet.
Sheet.