Cisco Cisco StadiumVision Director 설치 가이드
© 2011 Cisco Systems, Inc. All rights reserved
Page 34 of 71
Amber
Blinking
One or more noncritical fault conditions.
3
Green
On
Hard disk drive activity. This is an aggregated indication for all hard
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
Amber
On
Hard disk drive fault. This is an aggregated indication for all hard
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
disk drives. Each hard disk drive contains its own activity and fault
LEDs.
4
Green
On
NIC activity.
5
Blue
System identity. LED can be toggled remotely or by the front-panel
ID switch to obtain the system’s identity.
ID switch to obtain the system’s identity.
6
Switch
Toggles appliance ID LED
7
Switch
Asserts the NMI (non-maskable interrupt) to the processor on the
appliance. When pressed, clears the processor allowing the
processor to continue to execute the software normally.
appliance. When pressed, clears the processor allowing the
processor to continue to execute the software normally.
8
Switch
Resets the appliance.
9
Switch
Toggles the appliance power
The following LEDs provide power, activity, and status information:
Appliance power, green:
- On when power is on.
- Off when power is off or an error condition has been detected in the
- Off when power is off or an error condition has been detected in the
operating voltages.
Hard disk activity, green:
- On when appliance software has booted up, and the appliance is
operational.
- Off when appliance has not yet booted, or an error condition has been
detected in the boot process.
NIC 1 or NIC 2, green:
- On when packets are transferring
- Off when no packets are transferring
- Off when no packets are transferring