Cisco Cisco StadiumVision Mobile Streamer 관리 매뉴얼
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Internal Information. Page 15 of 19
Field
Required
Description
Possible Values
Old Suite Name
No
The name of an existing luxury suite or
other local control area.
other local control area.
This field is required if the operation type
is Update and the Suite Name is being
changed.
is Update and the Suite Name is being
changed.
Must match an existing suite name.
Suite DMP Logical
ID
ID
Yes, if device
is associated
with a local
control area
is associated
with a local
control area
For a given suite, the logical number for
each device. This determines the order in
which the TV labels are displayed on the
IP phone. For example, in a given suite,
Main may be 1, Bar may be 2, outside
may be 3.
each device. This determines the order in
which the TV labels are displayed on the
IP phone. For example, in a given suite,
Main may be 1, Bar may be 2, outside
may be 3.
A numeric value 1 through x, where
x is the total number of TVs/DMPs
in the suite.
x is the total number of TVs/DMPs
in the suite.
TV Name
No
The label shown on the TV when the
banner is brought up on the TV. This is
also the name displayed on the IP phone
identify the TV. For example, the label
may be a description of the TV's location
in the suite, like Main or Bar.
banner is brought up on the TV. This is
also the name displayed on the IP phone
identify the TV. For example, the label
may be a description of the TV's location
in the suite, like Main or Bar.
Alphanumeric text. Because this
name (or label) is displayed on the
IP Phone, the name should be
limited to 12 characters or less.
Due to the space allotted for display
labels on the IP Phone interface,
more than 12 characters may have
undesirable results.
name (or label) is displayed on the
IP Phone, the name should be
limited to 12 characters or less.
Due to the space allotted for display
labels on the IP Phone interface,
more than 12 characters may have
undesirable results.
Suite Controller IP
Yes, if device
is associated
with a local
control area
(not required if
Suite Control
Type is
Infrared)
is associated
with a local
control area
(not required if
Suite Control
Type is
Infrared)
The IP address of the IP phone or third
party device that will be controlling this
suite.
party device that will be controlling this
suite.
Must be unique. Must be a valid
IPv4 address (e.g. 0.0.0.256 is not
permitted). StadiumVision Director
does not validate the address or
check for duplicates; it only verifies
that the IP Address is in the correct
format.
IPv4 address (e.g. 0.0.0.256 is not
permitted). StadiumVision Director
does not validate the address or
check for duplicates; it only verifies
that the IP Address is in the correct
format.
Suite Controller
MAC
MAC
No
The MAC address of the IP phone or third
party device that will be controlling this
suite.
party device that will be controlling this
suite.
May be in the form
AA:BB:CC:DD:EE:FF or
aabb.ccdd.eeff or aabbccddeeff
The only permitted characters are
0-F and colon, dash, period as
shown above and letters are not
case sensitive.
AA:BB:CC:DD:EE:FF or
aabb.ccdd.eeff or aabbccddeeff
The only permitted characters are
0-F and colon, dash, period as
shown above and letters are not
case sensitive.
Suite Controller
Name
Name
Yes, if device
is associated
with a local
control area
(not required if
Suite Control
Type is
Infrared)
is associated
with a local
control area
(not required if
Suite Control
Type is
Infrared)
The human readable name of the local
control device.
control device.
Should only use A-Z a-z 0-9 space
_ -
_ -
Invalid Characters % * , : ? = / \ " ' [
] ( ) +
] ( ) +
Not to exceed 200 characters and
spaces.
spaces.
Old Suite Controller
Name
Name
No
The existing human readable name of the
local control device.
local control device.
This field is required if the operation type
is Update and the Suite Controller Name
is being changed.
is Update and the Suite Controller Name
is being changed.
Must match an existing device
name.
name.
External Suite ID
No
The suite ID used to identify this suite in
the Point of Sale system.
the Point of Sale system.
The external suite ID must match
value configured in the Point of
Sale system.
value configured in the Point of
Sale system.
External Suite
Name
Name
No
The suite name used to identify this suite
in the Point of Sale system.
in the Point of Sale system.
The external suite name (if
configured) must match value
configured in the Point of Sale
system.
configured) must match value
configured in the Point of Sale
system.