Cisco Cisco 1 GHz GainMaker Amplifier 설치 가이드
Chapter 3 Balancing and Setup
52
The following diagram shows the location of the AGC related switch, controls, and
AGC pad.
AGC pad.
To Select the AGC Pad Value
1 Use one of the following formulas to determine the correct AGC pad value.
1 Use one of the following formulas to determine the correct AGC pad value.
High Gain Dual : AGC pad value = RF output level at pilot frequency (main
output port) - 32 dB
output port) - 32 dB
2 After finding the correct AGC pad value, install it in the amplifier in the AGC pad
slot. The AGC setup illustration above also shows the location of the AGC pad.
3 Proceed to To Align the AGC Module.
To Align the AGC Module
Complete the following steps to align the AGC module.
1 Make sure that switch S1 is set to position 2.
1 Make sure that switch S1 is set to position 2.