Cisco Cisco ACNS Software Version 5.5 문제 해결 가이드
Manually Upgrading Enterprise CDN Equipment to
ACNS 4.x
ACNS 4.x
Document ID: 21588
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Step−by−Step Instructions
Related Information
Prerequisites
Requirements
Components Used
Conventions
Step−by−Step Instructions
Related Information
Introduction
Caution: Do not use this procedure if a Content Distribution Manager (CDM) is available.
This procedure is used to manually upgrade CDN Enterprise equipment from Enterprise Content Delivery
Network (ECDN) 2.X and 3.X to Application and Content Networking Software (ACNS). To upgrade ECDN
safely, use the manual upgrade procedure, as explained in the Cisco ACNS Software documentation on
Cisco.com.
Network (ECDN) 2.X and 3.X to Application and Content Networking Software (ACNS). To upgrade ECDN
safely, use the manual upgrade procedure, as explained in the Cisco ACNS Software documentation on
Cisco.com.
In some circumstances, you may need to upgrade without access to the GUI. In these cases, follow this
step−by−step procedure for either CDM or Content Engine (CE). If your CE does not have a CDM available,
or for some reason you received a CE50−CDN instead of a CE50, you want to use the procedure described in
this document.
step−by−step procedure for either CDM or Content Engine (CE). If your CE does not have a CDM available,
or for some reason you received a CE50−CDN instead of a CE50, you want to use the procedure described in
this document.
If your CDM failed to upgrade, and the HTTP process does not allow the use of the GUI to perform the
upgrade, you want to use the procedure described in this document.
upgrade, you want to use the procedure described in this document.
Prerequisites
Requirements
Readers of this document should have knowledge of these topics:
Basic UNIX/Linux
•
ECDN
•
ACNS
•
Components Used
This process has been tested with:
CE560−CDN CDN software 3.0.3rc4
•
CE560−CDN CDN software 3.0.2rc10
•
Upgraded to: