Cisco Cisco OptoStar II Driver Amplifier 설치 가이드
Installing/Removing the RF Adapter Plate, Continued
5. Hold the RF adapter plate with four flat-head screws towards the holes in
both installation lugs, and pre-fix the four screws.
6. Adjust the position of the RF adapter plate, and connect three flat-head
screws to the holes at the bottom of the RF adapter plate.
7. Tighten the four flat-head screws on both installation lugs.
8. Install corresponding modules and connect the RF cables.
8. Install corresponding modules and connect the RF cables.
Continued on next page
2-6
Installation
OL-29659-03