Cisco Cisco OptoStar II Driver Amplifier 설치 가이드

다운로드
페이지 75
Console-Module Control Interface, Continued 
Basic Parameter 
The table below lists the basic parameters of the OptoStar II power supply 
module. 
 
Basic Parameter 
Description 
Module Name and Firmware 
Version 
Shows the module name and its firmware 
version 
Output Voltage   
Shows output voltage (V) of the module   
Output Power 
Shows output power (W) of the module 
Output Current 
Shows output current (mA) of the module   
Module Temperature 
Shows the current module temperature (°C) 
Fan Status 
Shows if the fan of the power supply is in 
normal status 
S/N 
Shows module serial number 
Slot ID 
Shows the ID of the slot where the module 
is placed 
Rack ID 
Shows the ID of the rack where the chassis 
is placed 
Alarm Code 
Shows the current module alarm code 
Move the cursor to the question mark at the 
right side of the Alarm Codeto show the 
alarm list as below:   
 
Setup Parameters 
The table below lists the alarm parameter settings of the OptoStar II power 
supply module. 
Setup Parameters 
Description 
Factory Default 
Alarm ON/OFF 
Shows/sets module alarm status: 
ON/OFF 
Alarm status: ON 
OL-29664-05 
Operation 
3-21