Cisco Cisco OptoStar II Driver Amplifier 설치 가이드

페이지 71
Before You Begin
 
Before you begin the installation procedure, make sure you have all the tools and 
the module ready. 
Tools
 
The following tools and equipment are needed to install the module. 
 
Flat-head or round-head screws and washers
 
 
Flat-head or Phillips-head screwdriver   
Unpacking and Inspecting the Module 
Please follow the steps below to unpack and inspect the module for any damage. 
1.  Inspect the shipping boxes for any damage; 
2.  Unpack all boxes and confirm that the contents are complete. Remove the 
module; 
Note: Items in the shipping box include: 
 
One OptoStar II Reverse Receiver 
 
One factory test report 
 
One Mounting Instruction 
3.  Inspect the appearance of the module for any shipping damage. In case of 
damage, document it and inform the shipping company and our customer 
support. See Customer Support Information (on page 5-1) for details. 
4.  Keep the shipping boxes and their inserts for any future shipment for 
upgrade or repair. 
Note: In the event that the module must be returned to the manufacturer, any 
shipment damage resulting from improper packaging will be the 
responsibility of the customer. Inspect the boxes and equipment for any 
damage upon receipt. 
 
 
 
 
 
 
2-2 
Installation 
OL-29663-03 
downloadlike
ArtboardArtboardArtboard