Samsung CLX-3175FN CLX-3175FN/XAX 사용자 설명서

Installing Printer Software in Windows

7

When you connect your printer to a network, you must first 
configure the TCP/IP settings for the printer. After you have 
assigned and verified the TCP/IP settings, you are ready to 

install the software on each computer on the network.

You can install the printer software using the typical or custom 
method.

This is recommended for most users. All components necessary 

for printer operations will be installed.

Make sure that the printer is connected to your network 
and powered on. For details about connecting to the 

network, see the supplied printer’s User’s Guide.

Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation 

window appears.
If the installation window does not appear, click Start and 
then Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive and click OK.
If you use Windows Vista, click Start 

→ All programs → 

Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click 
Run Setup.exe in Install or run program field, and 

click Continue in the User Account Control window.

Click Next. 

• If necessary, select a language from the drop-down list.

Select Typical installation for a network printer. Click 

Next.

: If your printer is not connected to the network, the 

following window will appear. Select a setup option you want, 

click Next.

Then the Set IP Address window appears. Do as follows: 

1.Select a printer to be set with a specific IP address from the
   list.