Cisco Cisco IPCC Web Option 설치 가이드
Appendix B Registry Keys
Cluster Configuration Registry Keys
B-14
Remote Silent Monitoring Installation and Administration Guide
ClusterN_JTAPI_Password
JTAPI user password, as per ClusterN_JTAPI_User parameter
Type: REG_SZ
Value Required: Yes
Valid Values: String (alphanumeric special non-whitespace characters allowed)
Default Value: None
ClusterN_NumSimPhonesUsedForCTIOSAgentLogins
Number of simphones in the login pool for the given cluster configuration.
Normally this value is set to 5 and should not be changed. For more information,
refer to the “Login Pool Simphone Setup” topic in Chapter 3, Pre-Installation
Tasks.
Normally this value is set to 5 and should not be changed. For more information,
refer to the “Login Pool Simphone Setup” topic in Chapter 3, Pre-Installation
Tasks.
Type: REG_SZ
Value Required: Yes
Valid Values: Any numeric string between 1 and 10
Default Value: 5
ClusterN_PhoneSim_StartMACRange
First MAC address to use for auto-generation of MAC range for simphone device
names. For example, if 000000100010 is specified, the range would proceed with
SIP000000100010, SIP000000100011, SIP000000100012, and so forth.
names. For example, if 000000100010 is specified, the range would proceed with
SIP000000100010, SIP000000100011, SIP000000100012, and so forth.
MAC ranges must not overlap between clusters. Note that the 0000:5Exx range is
normally reserved for public use, as per IANA standards.
normally reserved for public use, as per IANA standards.
Type: REG_SZ
Value Required: Yes
Valid Values: Twelve-digit, numerical hexadecimal
Default Value: 00005E000001