Cisco Model D9500 Switched Digital Video Server (NTSC and PAL) 릴리즈 노트
4035984 Rev A
3
General Information
Addressed a race condition where a non-PowerKey QAM could be out of sync
with the SdvSM due to certain timeout conditions that may occur during
session setup.
with the SdvSM due to certain timeout conditions that may occur during
session setup.
Brassd Agent Watch Dog reporting. This is now a Max log level message.
Enhanced the error message logged for CcpEventIndErr to include the actual
error code.
error code.
HA correction for database transfer issue.
Corrected Status Count for Server session Status Confirm.
Enhancement for RFGW Edge input port control. Corrected issue with releasing
sessions from an edge input.
sessions from an edge input.
Corrected issue with Copy Protection settings. Server Add Resource Request
now passes the Copy Protection setting to the OCAI interface.
now passes the Copy Protection setting to the OCAI interface.
SaCaManager Asynchronous mode removed.
Open Issues and Known Restrictions
Release 2.1.4 has the following known open issues and restrictions:
No commas, periods, or spaces can be used in any device name on the USRM.
-
Workaround: If multiple words are required, use an underscore in the place
of the comma, period, or space.
of the comma, period, or space.
For users of Internet Explorer, logging out of the USRM webUI requires the
browser to be fully closed for logout to occur, as IE caches the user.
browser to be fully closed for logout to occur, as IE caches the user.
The version of Firefox included with DNCS 4.2 is not completely compatible
with the enhanced web UI used with 2.1.4.
with the enhanced web UI used with 2.1.4.
-
Workaround: use Internet Explorer or Firefox from alternate source to
view/manipulate the USRM web UI.
view/manipulate the USRM web UI.
During initial configuration or any other operation that requires adding a large
number of high density QAMs (e.g. 72 TSIDs or more) to a USRM database via a
config file, it is recommended to add a maximum of 15 QAMs per config file.
number of high density QAMs (e.g. 72 TSIDs or more) to a USRM database via a
config file, it is recommended to add a maximum of 15 QAMs per config file.
-
Workaround: Use the new spreadsheet (CSV) import feature.
During Service Group migration or any other operation that requires removing a
large number of Service Groups containing 6000 or more STBs from a USRM
database via a config file, it is recommended to remove a maximum of 20 SGs per
config file.
large number of Service Groups containing 6000 or more STBs from a USRM
database via a config file, it is recommended to remove a maximum of 20 SGs per
config file.
The pop up box for Server Sip Timeout states that the valid range is from 1 to
99999 but the field is actually limited to 10 to 99999.
99999 but the field is actually limited to 10 to 99999.
MSA does not log an error when the STB is not in the RCAS DB (0xca00004).
MSA does not log the error when the SspTcp connection is not available. This
may be due to VodSm timeouts being longer than 30 seconds.
may be due to VodSm timeouts being longer than 30 seconds.