Cisco Headend System Release 2.5 사용자 가이드
736123 Rev B
3
Process Overview
Process Overview
This section provides a summary of the process for configuring SR 4.0 to support the
CP MMI screen. This section also lists the requirements your system must meet prior
to configuring the system to support the CP MMI screen.
Prerequisites
Before you begin completing procedures in this guide, make sure that your system
meets the following prerequisites:
SR 4.0 is currently installed on your system.
M-Card modules in your system support PowerKEY® M-Card Module software
release 1.0 and later.
Note: The lab release of PowerKEY S-Card software version 1.53 may also be
Note: The lab release of PowerKEY S-Card software version 1.53 may also be
used.
CableCARD modules are configured according to the instructions described in
Setting Up the PowerKEY
®
CableCARD™ and M-Card™ Modules on the DNCS For
System Releases 2.5/3.5 and 4.0 (part number 4011765).
Important: Use the procedures in this guide only for SR 4.0 systems. Implementing
the configuration described by this guide on systems using SR 4.2 and later may
cause unexpected results.
Configuration Process
To configure SR 4.0 for the CP MMI screen, refer to the following process overview.
For detailed procedures, refer to the remainder of this guide.
1 Download the default CPDefinition.tblo file from the FTP site to the DNCS. For
1 Download the default CPDefinition.tblo file from the FTP site to the DNCS. For
more information, go to Download the Default CPDefinition.tblo File (on page
2 Make a backup copy of the default CPDefinition.tblo file. For more information,
go to Make a Backup Copy of the Default CPDefinition.tblo File (on page 8).
3 Link the CPDefinition.tblo file to the 0 directory on the POD_Data BFS server.
For more information, go to Link the CPDefinition.tblo File to the BFS Directory
(on page 9).
4 Verify that the CP MMI screen displays as expected when an M-Card is inserted
into the host device. For more information, go to Verify Setup of the CP MMI
Screen (on page 11).