Cisco Cisco ASA 5505 Adaptive Security Appliance 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Restrictions
Components Used
Conventions
Background Information
Configure
Network Diagram
Full Tunnel Configuration
ASA Configuration Using Adaptive Security Device Manager (ASDM)
ASA Configuration Using CLI
Windows 8 L2TP/IPsec Client Configuration
Split Tunnel Configuration
Configuration on ASA
Configuration on L2TP/IPsec client
Verify
Troubleshoot
Related Information
Introduction
This document describes how to configure Layer 2 Tunneling Protocol (L2TP) over IPsec using
pre-shared key between Cisco Adaptive Security Appliance (ASA) and Windows 8 native client.
pre-shared key between Cisco Adaptive Security Appliance (ASA) and Windows 8 native client.
L2TP over Internet Protocol security (IPsec) provides the capability to deploy and administer an
L2TP Virtual Private Network (VPN) solution alongside the IPsec VPN and firewall services in a
single platform.
L2TP Virtual Private Network (VPN) solution alongside the IPsec VPN and firewall services in a
single platform.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
IP connectivity from the client machine to the ASA. To test connectivity, try to ping the IP
address of the ASA from client endpoint and vice versa
address of the ASA from client endpoint and vice versa
●
Ensure that UDP port 500 and 4500 and Encapsulating Security Payload (ESP) protocol is not
blocked anywhere along the path of the connection
blocked anywhere along the path of the connection
●
Restrictions