Cisco Cisco Content Security Management Appliance M690 사용자 가이드
14-14
AsyncOS 9.5.x for Cisco Content Security Management Appliances User Guide
Chapter 14 Common Administrative Tasks
Disaster Recovery on the Security Management Appliance
Step 4
Run a backup from the old/primary/source appliance. See instructions at
Step 5
Wait for the backup to complete.
Step 6
Run the
suspendtransfers
and
suspend
commands on the old/primary/source appliance.
Step 7
Run a second backup to transfer last-minute data from the old/primary/source to the new/backup/target
appliance.
appliance.
Step 8
Import the configuration file into the new/backup/target appliance.
Step 9
Run the
resumetransfers
and
resume
commands on the new/backup/target appliance.
Do NOT run this command on the old/original primary/source appliance.
Step 10
Establish the connection between the new/backup/target appliance and the managed email and web
security appliances:
security appliances:
a.
Select Management Appliance > Centralized Services > Security Appliances.
b.
Click an appliance name.
c.
Click the Establish Connection button.
d.
Click Test Connection.
e.
Return to the list of appliances.
f.
Repeat for each managed appliance.
Step 11
Verify that the new/target appliance is now functioning as the primary appliance:
Select Management Appliance > Centralized Services > System Status and check the status of data
transfers.
transfers.
Disaster Recovery on the Security Management Appliance
If your Security Management appliance unexpectedly fails, use the following procedure to restore
security management services and your backed-up data, which you regularly save using the information
in
security management services and your backed-up data, which you regularly save using the information
in
A typical appliance configuration might look like
: