Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 관리 매뉴얼

Simple Network Management Protocol

Targets

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

142

To add SNMP targets:

STEP 1

Select SNMP > Targets in the navigation pane.

STEP 2

Click Add. A new row is created in the table.

STEP 3

Check the box in the new row and click Edit.

STEP 4

Configure the parameters:

•

IP Address—Enter the IPv4 address of the remote SNMP manager to
receive the target.

•

UDP Port—Enter the UDP port to use for sending SNMPv3 targets.

•

Users—Enter the name of the SNMP user to associate with the target. To
configure SNMP users, see the

STEP 5

Click Save. The user is added to the SNMPv3 Targets list and your changes are
saved to the Startup Configuration.

NOTE

To remove an SMMP target, select the user in the list and click Delete.