Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 관리 매뉴얼
Status and Statistics
System Summary
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
16
2
•
Serial Number—The serial number of the Cisco WAP device.
•
Base MAC Address—The WAP MAC address.
•
Firmware Version—The firmware version number of the active image.
•
Firmware MD5 Checksum—The checksum for the active image.
•
Host Name—A name assigned to the device.
•
System Uptime—The time that has elapsed since the last reboot.
•
System Time—The current system time.
•
Power Source—The system may be powered by a power adapter, or may
be receiving power-over-Ethernet from PoE power-sourcing equipment
(PSE).
be receiving power-over-Ethernet from PoE power-sourcing equipment
(PSE).
The TCP/UDP Service table shows basic information about protocols and
services operating on the WAP.
services operating on the WAP.
•
Service—The name of the service, if available.
•
Protocol—The underlying transport protocol that the service uses (TCP or
UDP).
UDP).
•
Local IP Address—The IP address, if any, of a remote device that is
connected to this service on the WAP device. All indicates that any IP
address on the device can use this service.
connected to this service on the WAP device. All indicates that any IP
address on the device can use this service.
•
Local Port—The port number for the service.
•
Remote IP Address—The IP address of a remote host, if any, that is using
this service. All indicates that the service is available to all remote hosts that
access the system.
this service. All indicates that the service is available to all remote hosts that
access the system.
•
Remote Port—The port number of any remote device communicating with
this service.
this service.
•
Connection State—The state of the service. For UDP, only connections in
the Active state appear in the table. In the Active state, a connection is
established between the WAP device and a client or server. The TCP states
are:
the Active state appear in the table. In the Active state, a connection is
established between the WAP device and a client or server. The TCP states
are:
-
Listening—The service is listening for connection requests.
-
Active—A connection session is established and packets are being
transmitted and received.
transmitted and received.