Cisco Cisco UCS B200 M4 Blade Server 백서
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 92 of 95
g. Verify that nodes are added to the Microsoft SQL Server 2012 failover cluster on the Microsoft Windows
2008 R2 guest virtual machine VMSQLNODE2 node. Launch the Failover Cluster Management console, and
under Services and Applications verify that the MSSQL2012 instance has been added, that the cluster IP
address and storage cluster disks status are listed as Online, and that under Nodes, both VMSQLNODE1 and
VMSQLNODE2 are listed, as shown in Figure 81.
2008 R2 guest virtual machine VMSQLNODE2 node. Launch the Failover Cluster Management console, and
under Services and Applications verify that the MSSQL2012 instance has been added, that the cluster IP
address and storage cluster disks status are listed as Online, and that under Nodes, both VMSQLNODE1 and
VMSQLNODE2 are listed, as shown in Figure 81.
Figure 81. Verify the Storage Cluster Disk Status and That Both Nodes Are Listed
3. Perform the following steps to test failover of Microsoft SQL Server 2012 with the VMSQLNODE1 and
VMSQLNODE2 cluster nodes.
a. Log in to the VMSQLNODE1 cluster node, which currently manages and owns the MSSQL2012 SQL
instance, as shown in Figure 82, and then shut down the node.
instance, as shown in Figure 82, and then shut down the node.