Cisco Cisco TelePresence Video Communication Server Expressway 릴리즈 노트

다운로드
페이지 50
Resolved caveats 
Cisco TelePresence Video Communication Server X7.2.2 Software Release Notes 
Page 25 of 50 
 
 
Identifier 
Summary 
Conditions: A SIP/H.323 interworked call is never torn down at the H.323 end despite 408 
Request Timeout messages being generated. 
Workaround: None, although non-interworked calls will not be affected. 
CSCua02807 
Symptoms: The VCS loses its connection to Active Directory (identified by running "net ads 
testjoin" on the root command line) and users cannot be authenticated with NTLM. 
Conditions: This will occur if an AD server does not respond to a machine account password 
change request within 10 seconds. 
Workaround: Re-join the domain with the "domain_management" command as root. A fix to 
disable machine password refreshes will be developed. 
Additional info: Note that the NTLM web page does not show the correct join status in this 
scenario. This is addressed by CSCty38860. 
CSCua11868 
Symptom: When calling from VCS to OCS/Lync via B2BUA, B2BUA removes ";user=phone" 
from the request-URI. 
Conditions: None. 
Workaround: None. 
CSCud58380 
Symptom: Security Issue in Apache. Vulnerabilities CVE-2012-0883, CVE 2012-0053, CVE 
2012-0031, and CVE 2012-0021 apply to Apache version 2.2.21 found in Cisco VCS version 
X7.1. 
Conditions: None. 
Workaround: Upgrade to Cisco VCS X7.2.x 
Additional Information: Cisco VCS version X7.2.x runs Apache version 2.4.2 which 
resolves these issues. 
Resolved in X7.1 
 
Identifier 
Summary 
CSCtt13556 
When a new policy service is created or modified its status defaults to Active
Symptom: when a policy service is created or modified its status defaults to Active. It can 
remain as Active for 30 seconds - long enough to convince the user that it really is active, 
even if it subsequently fails. 
Workaround: after creating or modifying a policy service, wait 30 seconds and then refresh 
the policy services page. 
CSCtx34916 
Duplicate of CSCtx34918. 
CSCtr80175 
Cisco VCS Starter Pack Express and remote authentication of login account 
credentials requires lower case usernames: 
when setting up user (FindMe) accounts you 
must enter the account usernames in lower case. If usernames are created with mixed or 
upper case the user will not be able to log in to the Cisco VCS. Note that passwords are case 
sensitive. 
This issue applies only if you have a Cisco VCS Starter Pack Express and are using remote 
(LDAP) authentication of login account credentials. 
CSCtr37987 
During normal operation the system temp alarm got raised on the VCS but didn't clear
The user might see the following in the /var/log/messages: 
hwstatus: Event="Application Crash" Detail="Traceback (most recent call last):,   File 
'/bin/hwstatus.py' 
CSCtr80189 
Viewing web pages with IE8 in compatibility mode: there are display problems with the 
Cisco VCS web interface when viewing web pages with IE8 in compatibility mode. The 
workaround is to switch off IE8 compatibility mode. 
CSCtr77658 
Cisco VCS sends SIP INFO for content channel without stream ID: when interworking 
calls from H.323 to SIP, Fast Update Requests do not contain a stream ID. 
CSCtx71406 
Symptoms: Make an interworked call from an H.323 MCU 4.3 to Movi and send some 
content to Movi. Then from the participants list page disable content to Movi. Movi continues 
to display content but the content freezes at the point of disabling.