Vision TC2-CTL2 전단
TECHCONNECT IR CONTROL
2
MODULAR CONTROL PANEL
Button layout and labels can be changed
to suit each application. A standardized
control interface results in confident users,
meaning fewer support calls.
to suit each application. A standardized
control interface results in confident users,
meaning fewer support calls.
INTELLIGENT FUNCTION-SPECIFIC
BUTTONS
BUTTONS
POWER: The power buttons (top) are
pre-set to send up to three stored codes
each at the same time for turning all
equipment on or off with one press. It will
automatically send the projector’s ‘off’
code twice.
pre-set to send up to three stored codes
each at the same time for turning all
equipment on or off with one press. It will
automatically send the projector’s ‘off’
code twice.
INPUT: The input buttons (middle) can
learn up to four codes each, and can
broadcast in two ways: to suit your
application:
broadcast in two ways: to suit your
application:
Sequential
Press 1: Projector PC1 Input
Press 2: Projector PC2 Input
Press 3: Projector VID Input
Press 4: Projector S-VID Input
Press 1: Projector PC1 Input
Press 2: Projector PC2 Input
Press 3: Projector VID Input
Press 4: Projector S-VID Input
Toggle Example:
Press 1:
Projector PC1 Input and Amplifier Input 1
Projector PC1 Input and Amplifier Input 1
Press 2:
Projector PC2 Input and Amplifier Input 2
Projector PC2 Input and Amplifier Input 2
VOLUME: The volume buttons (bottom)
can only learn one code each, but outputs
that code repeatedly if held down.
can only learn one code each, but outputs
that code repeatedly if held down.
MULTI-DEVICE CONTROL
Learns codes for up to three
AV devices. Press ON once to
drop the screen, turn the projector,
and turn the amplifier on.
AV devices. Press ON once to
drop the screen, turn the projector,
and turn the amplifier on.
ADVANCED IR LEARNING
Use the remote control from your
equipment to program the module in a few
easy steps. The new Techconnect Control
equipment to program the module in a few
easy steps. The new Techconnect Control
2
features increased processing and
memory power to cover a wider range of
IR protocols.
memory power to cover a wider range of
IR protocols.
COPY FUNCTION
Once fully programmed, the codes from
one Control
one Control
2
module can be duplicated to
other Control
2
modules.
MAINS POWER OR BATTERY
The Control
2
module comes with a 3
Volt lithium battery for long life or it can
share the power supply provided with a
Techconnect Amplifier
share the power supply provided with a
Techconnect Amplifier
2
. This power supply
is also available as a spare.
TECHCONNECT INTEGRATION
Package includes single-gang surround
and backbox, or you can mount it in a
double-gang surround so you can have
connectors, control, and audio on one
faceplate.
and backbox, or you can mount it in a
double-gang surround so you can have
connectors, control, and audio on one
faceplate.
“
“
If you have any questions just ask Dave. He’s an
installer just like you and he’ll be happy to help.
Go to www.visionaudiovisual.com/askdave
installer just like you and he’ll be happy to help.
Go to www.visionaudiovisual.com/askdave
ASK DAVE...
installation:innovation
www.visionaudiovisual.com