Cisco Cisco Packet Data Gateway (PDG)
Description
Required Information
An identification string from 1 to 63 characters (alpha and/or numeric)
by which the RTP pool is configured and associated with CS network
configuration to allocate RTP IP address to session managers in
HNB-GW service over IuCS towards CS core networks.
by which the RTP pool is configured and associated with CS network
configuration to allocate RTP IP address to session managers in
HNB-GW service over IuCS towards CS core networks.
RTP IP Pool name
Specifies the default MSC point-code with HNB-CS network instance.
This MSC point code (SS7 address) is used when HNB-GW is to be
connected to only one MSC with in a CS network or as default MSC
for all HNBs connected through specific HNB-CS network instance.
This MSC point code (SS7 address) is used when HNB-GW is to be
connected to only one MSC with in a CS network or as default MSC
for all HNBs connected through specific HNB-CS network instance.
Default MSC point code
Packet Switched Network Configuration
An identification string between 1 and 63 characters (alpha and/or
numeric) by which the Packet Switched Core Networks instance which
needs to be associated with HNB Radio Network PLMN id.
An HNB-CS network instance is required for Femto UMTS access
over IuPS/Iu-Flex interface between HNB-GW service and PS
networks elements; i.e. SGSN.
numeric) by which the Packet Switched Core Networks instance which
needs to be associated with HNB Radio Network PLMN id.
An HNB-CS network instance is required for Femto UMTS access
over IuPS/Iu-Flex interface between HNB-GW service and PS
networks elements; i.e. SGSN.
Multiple PS network instances (maximum 8) can be configured on a
system.
system.
Packet Switched Network instance
Specifies a predefined Signaling Connection Control Part (SCCP)
network id in at system level in Global configuration mode to be
associated with the PS network instance in order to route the messages
towards SGSN over IuPS interface.
network id in at system level in Global configuration mode to be
associated with the PS network instance in order to route the messages
towards SGSN over IuPS interface.
SCCP Network id
An identification string from 1 to 63 characters (alpha and/or numeric)
by which the GTP-U service can be associated with HNB-GW system
in PS network instance for GTP-U tunnel towards core network. It is
pre-configured in destination context.
Multiple names are needed if multiple GTP services is used.
by which the GTP-U service can be associated with HNB-GW system
in PS network instance for GTP-U tunnel towards core network. It is
pre-configured in destination context.
Multiple names are needed if multiple GTP services is used.
One GTP-U service can be associated in PS network
instance to provide GTP-U tunnel over IuPS interface
towards PS core network and another GTP-U service
needs to be associated in HNB-GW service instance for
GTP-U tunnel over Iuh interface towards HNB.
instance to provide GTP-U tunnel over IuPS interface
towards PS core network and another GTP-U service
needs to be associated in HNB-GW service instance for
GTP-U tunnel over Iuh interface towards HNB.
Important
GTP-U service name
Specifies the default SGSN point-code with HNB-CS network
instance. This SGSN point code (SS7 address) is used when HNB-GW
is to be connected to only one SGSN with in a PS network or as default
SGSN for all HNBs connected through specific HNB-PS network
instance.
instance. This SGSN point code (SS7 address) is used when HNB-GW
is to be connected to only one SGSN with in a PS network or as default
SGSN for all HNBs connected through specific HNB-PS network
instance.
Default SGSN point code
HNB-GW Administration Guide, StarOS Release 19
86
HNB-GW Service Configuration Procedures
Required System-Level Configuration Information