Cisco Cisco ASA 5580 Adaptive Security Appliance 기술 매뉴얼
Configure the ASA for Redundant or Backup ISP
Links
Links
Document ID: 118962
Contributed by Prashant Joshi and Dinkar Sharma, Cisco TAC
Engineers.
May 15, 2015
Engineers.
May 15, 2015
Contents
Introduction
Prerequisites
Requirements
Components Used
Related Products
Background Information
Static Route Tracking Feature Overview
Important Recommendations
Configure
Network Diagram
CLI Configuration
ASDM Configuration
Verify
Confirm that the Configuration is Complete
Confirm that the Backup Route is Installed (CLI Method)
Confirm that the Backup Route is Installed (ASDM Method)
Troubleshoot
Debug Commands
Tracked Route is Removed Unnecessarily
Related Information
Prerequisites
Requirements
Components Used
Related Products
Background Information
Static Route Tracking Feature Overview
Important Recommendations
Configure
Network Diagram
CLI Configuration
ASDM Configuration
Verify
Confirm that the Configuration is Complete
Confirm that the Backup Route is Installed (CLI Method)
Confirm that the Backup Route is Installed (ASDM Method)
Troubleshoot
Debug Commands
Tracked Route is Removed Unnecessarily
Related Information
Introduction
This document describes how to configure the Cisco ASA 5500 Series Adaptive Security Appliance (ASA)
for the use of the static route tracking feature in order to enable the device to use redundant or backup Internet
connections.
for the use of the static route tracking feature in order to enable the device to use redundant or backup Internet
connections.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco ASA 5555−X Series that runs software Version 9.x or later
•