Cisco Headend Digital Broadband Delivery System 설치 가이드
Configure the CableCARD Server
4036043 Rev B
77
Configure the CableCARD Server
After you upgrade your system to SR 2.8.1/3.8.1/4.3.1, the Set Authorization Time-
out Period and Set DeAuthorization Time-out Period fields on the Configure
CableCARD Server window need to be set at specific values. These values instruct
the CableCARD server when to stop adding authorization and deauthorization
records to the BFS file, which keeps the BFS file from growing too large. The
instructions in this section guide you through the necessary steps.
Note: Beginning with the upgrade to SR 4.2, the value stored in the Max Key Session
Period is multiplied by a factor of 10. This does not change the value received by the
CableCARD, however. See CR 46084 for additional information.
out Period and Set DeAuthorization Time-out Period fields on the Configure
CableCARD Server window need to be set at specific values. These values instruct
the CableCARD server when to stop adding authorization and deauthorization
records to the BFS file, which keeps the BFS file from growing too large. The
instructions in this section guide you through the necessary steps.
Note: Beginning with the upgrade to SR 4.2, the value stored in the Max Key Session
Period is multiplied by a factor of 10. This does not change the value received by the
CableCARD, however. See CR 46084 for additional information.
Configuring the CableCARD Server
Complete the following steps to ensure that the minimum Set Authorization Time-
out Period and Set DeAuthorization Time-out Period fields on the Configure
CableCARD Server window are configured correctly. Reference the numbers you
recorded when you completed Check CableCARD Server (on page 20).
1 From the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab and then click CableCARD. The
out Period and Set DeAuthorization Time-out Period fields on the Configure
CableCARD Server window are configured correctly. Reference the numbers you
recorded when you completed Check CableCARD Server (on page 20).
1 From the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab and then click CableCARD. The
CableCARD Data Summary screen opens.
3 Click Server Configuration. The CableCARD Data Summary screen updates to
display the Server Configuration portion of the screen.
4 Examine the Authorization Time-out Period field. Make sure its value is
identical to what you recorded in Check CableCARD Server (on page 20).
5 Examine the DeAuthorization Time-out Period field. Make sure its value is
identical to what you recorded in Check CableCARD Server (on page 20).
6 Click Save CableCARD Server Config.
7 Click Exit all CableCARD Screens.
7 Click Exit all CableCARD Screens.