Cisco Cisco D9800 Network Transport Receiver 데이터 시트
Model D9852 Dual Decrypt Program Receiver
2
Key Features,
Continued
• DVB or Imitext™ subtitling
• DTMF cue tone for analog ad insertion triggering
• Eight uplink-controlled open collector outputs via cue trigger commands for device control or ad-insertion
• One programmable contact closure for device control, redundancy switching or alarm monitoring
• Fingerprint
Trigger
• Field upgradeable software and security
• Front panel LCD for control & monitoring
• 64 user-editable network tuning preset configurations
• SNMP and web browser interface for setup, control and monitoring
Optional Features
• ASI input (up to 68.5 Mbps)
• SDI video output with embedded audio
• AES-3id digital audio output
Specifications
Features
Description
System
MPEG-2/DVB Compatible
EN 300 421, EN 300 468
EN 300 421, EN 300 468
De-modulation: QPSK
FEC: Variable (1/2, 2/3, 3/4, 5/6, or 7/8)
FEC: Variable (1/2, 2/3, 3/4, 5/6, or 7/8)
Tuner
Number of RF Inputs: 4 (one active at a
time)
Input Level: -25 dBm to -65 dBm per
carrier
Frequency Range: 950 MHz to 2150 MHz
Tuning Step Size: 125 kHz
time)
Input Level: -25 dBm to -65 dBm per
carrier
Frequency Range: 950 MHz to 2150 MHz
Tuning Step Size: 125 kHz
Symbol Rate Range: 1.0 to 45
Msymbols/s
Carrier Capture Range: ≥ ±3.0 MHz
(5-45 Msym)
Satellites: C-band and Ku-band
Input Impedance: 75Ω
Msymbols/s
Carrier Capture Range: ≥ ±3.0 MHz
(5-45 Msym)
Satellites: C-band and Ku-band
Input Impedance: 75Ω
Analog Outputs
Analog SD Video Output
Number of Channel: One (two identical
outputs)
Video Decompression Type: MPEG-2 4:2:0
Output Level: 1.0 Vpp ± 5%
Output Impedance: 75Ω
Video Standard: NTSC & PAL B/G/I/D/M/N
Frequency Response:
NTSC: 0.0-4.2 MHz ≤ +0.5 dB/-0.75 dB
PAL: 0.0-5.0 MHz ≤ +0.5/-1.25 dB
Maximum Video Resolution: 720x480/576
Maximum Video Bit rate: 15 Mb/s
Chroma-luma Delay: ± 30 ns
Field Time Distortion: ≤ 3%
Line Time Distortion: ≤ 3%
Luminance Non-linearity: ≤ 5%
Differential Gain: ≤ 3%
Differential Phase: ≤ 3°
Signal-to-Noise Ratio: ≥ 55 dB
Number of Channel: One (two identical
outputs)
Video Decompression Type: MPEG-2 4:2:0
Output Level: 1.0 Vpp ± 5%
Output Impedance: 75Ω
Video Standard: NTSC & PAL B/G/I/D/M/N
Frequency Response:
NTSC: 0.0-4.2 MHz ≤ +0.5 dB/-0.75 dB
PAL: 0.0-5.0 MHz ≤ +0.5/-1.25 dB
Maximum Video Resolution: 720x480/576
Maximum Video Bit rate: 15 Mb/s
Chroma-luma Delay: ± 30 ns
Field Time Distortion: ≤ 3%
Line Time Distortion: ≤ 3%
Luminance Non-linearity: ≤ 5%
Differential Gain: ≤ 3%
Differential Phase: ≤ 3°
Signal-to-Noise Ratio: ≥ 55 dB
Analog Audio Output
Number of Channels: Two stereo pairs/
four mono channels
Audio decompression: MPEG or Dolby
Digital (AC-3)
Output Level: Balanced, adjustable audio
outputs are factory set for unity gain (0 dBm
out over 600Ω for 0 dBm in). Output is
adjustable at the front panel by ±6.0 dB (ref.,
100 KΩ). Factory calibrated to +18 dBu (at
full scale).
Frequency Response: ±0.5 dB, 20 Hz to
20 kHz (ref., 100 KΩ)
Total Harmonic Distortion: < 0.3% at 1
kHz (ref. 100 KΩ)
Dynamic Range: 85 dB (CCIR/Arm
weighting)
Crosstalk: 80 dB at 1 kHz (typical)
Number of Channels: Two stereo pairs/
four mono channels
Audio decompression: MPEG or Dolby
Digital (AC-3)
Output Level: Balanced, adjustable audio
outputs are factory set for unity gain (0 dBm
out over 600Ω for 0 dBm in). Output is
adjustable at the front panel by ±6.0 dB (ref.,
100 KΩ). Factory calibrated to +18 dBu (at
full scale).
Frequency Response: ±0.5 dB, 20 Hz to
20 kHz (ref., 100 KΩ)
Total Harmonic Distortion: < 0.3% at 1
kHz (ref. 100 KΩ)
Dynamic Range: 85 dB (CCIR/Arm
weighting)
Crosstalk: 80 dB at 1 kHz (typical)
VBI
NTSC lines 10 to 22 fields 1 and 2
Line 21 closed captions
NABTS, AMOL I and II (Nielsen)
Line 21 closed captions
NABTS, AMOL I and II (Nielsen)
PAL lines 7 to 22 fields 1 and 2
WST, WSS, VPS, transparent lines
WST, WSS, VPS, transparent lines
Data Outputs
RS-232 asynchronous data at rates up to
38.4 kb/s
Rates:
300/1200/2400/4800/9600/19,200/38,400 b/s
38.4 kb/s
Rates:
300/1200/2400/4800/9600/19,200/38,400 b/s
Ethernet Output for DVB MPE IP data
RJ-45, 10/100BaseT, up to 50 Mbps
RJ-45, 10/100BaseT, up to 50 Mbps