Cisco Cisco TelePresence MX700 설치 가이드

Setting the Administrator Settings 

menu password

When starting up the system for the first time the Administrator

Settings menu password is not set.

A warning on the screen of your video system indicates if no

administrator password is set. to remove the warning you

must set an administrator password. if you wish to remove

the warning without setting a password, you can leave the

password field blank, though this is not advisable.

NoTe: 

We strongly recommend that you define a password to

protect the Administrator Settings menu, since these settings

affect the behavior of the video conference system.

1. Go to

.

on the remote control, press the # key to toggle between

lower or upper case characters and numbers: abc/ABC/123.

2. enter the menu password. the password you enter is

hidden; each character is replaced with an asterisk (*).

3. Select

to save the changes, or

to leave without

saving.

4. Press

(   )

to exit.

Back to task overview

Cisco telePresence Video Systems

d14639.08 Video Systems Getting Started Guide tC6.0, february 2013.

Copyright © 2010–2013 Cisco Systems, inc. All rights reserved.

22

Getting Started Guide

Contents

Introduction

User interfaces

Configuration

Appendices

Contacts

Configuration