Cisco Cisco Email Security Appliance C170 사용자 가이드

NIC pairing allows you to combine any two physical data ports in order to provide a backup Ethernet 
interface if the data path from the NIC to the upstream Ethernet port should fail. Basically, pairing 
configures the Ethernet interfaces so that there is a primary interface and a backup interface. If the 
primary interface fails (i.e. if the carrier between the NIC and the upstream node is disrupted), the 
backup interface becomes active and an alert is sent. Within Cisco IronPort documentation, NIC pairing 
is synonymous with NIC teaming.

You can create more than one NIC pair, providing you have enough data ports. When creating pairs, you 
can combine any two data ports. For example:

Data 1 and Data 2

Data 3 and Data 4

Data 2 and Data 3

etc.

7. 1000baseTX full-duplex

[1]> 5

Ethernet interfaces:

1. Data 1 (Autoselect: <100baseTX full-duplex>) 00:06:5b:f3:ba:6d

2. Data 2 (100baseTX full-duplex: <100baseTX full-duplex>) 00:06:5b:f3:ba:6e

3. Management (Autoselect: <100baseTX full-duplex>) 00:02:b3:c7:a2:da

Choose the operation you want to perform:

- EDIT - Edit an ethernet interface.

[]>

Choose the operation you want to perform:

- MEDIA - View and edit ethernet media settings.

- PAIRING - View and configure NIC Pairing.

- VLAN - View and configure VLANs.

- LOOPBACK - View and configure Loopback.

[]>