Cisco Cisco ASA 5585-X Adaptive Security Appliance 문제 해결 가이드

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Background Information
 Mitigate Cisco ASA Flash Corruption Issues
      Run the "fsck" utility
      Format the Flash
      Replace the flash card manually
      Error Messages
 Useful FAQ

Can I hot−swap the flash drive? For example, is it possible to change the flash drive when Cisco ASA is
powered ON and running?
Can I use third party flash drives on Cisco ASA?
What do I do if I accidentally erase flash by mistake?
Does formatting the flash affect the running connections on Cisco ASA?
Can I use external flash as internal flash?
Related Information

This document describes different possible errors that occur because of the Cisco ASA flash corruption and
also points the possible solutions.

There are no specific requirements for this document.

The information in this document is based on these software and hardware versions:

Cisco ASA 5500 series with software version 8.0 and later

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for more information on document conventions.