Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼

Views

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

137

•

Trap Destination Table—A list of up to three IP addresses or hostnames to 
receive SNMP traps. Check the box and choose a Host IP Address Type 
(IPv4 or IPv6) before adding the Hostname/IP Address.

An example of a DNS hostname is snmptraps.foo.com. Because SNMP traps 
are sent randomly from the SNMP agent, it makes sense to specify where 
exactly the traps should be sent. You can have a maximum of three DNS 
hostnames. Ensure that you select the Enabled check box and select the 
appropriate Host IP Address Type.

Also see the note about hostnames in the preceding step.

Click Save. The changes are saved to the Startup Configuration.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this happens, the WAP device may lose connectivity. We 
recommend that you change WAP device settings when a loss of connectivity will 
least affect your wireless clients. 

An SNMP MIB view is a family of view subtrees in the MIB hierarchy. A view 
subtree is identified by the pairing of an Object Identifier (OID) subtree value with a 
bit string mask value. Each MIB view is defined by two sets of view subtrees, 
included in or excluded from the MIB view. You can create MIB views to control the 
OID range that SNMPv3 users can access.

The WAP device supports a maximum of 16 views.

These notes summarize some critical guidelines regarding SNMPv3 view 
configuration. Please read all the notes before proceeding.

A MIB view called all is created by default in the system. This view contains all 
management objects supported by the system.

By default, view-all and view-none SNMPv3 views are created on the WAP device. 
These views cannot be deleted or modified.

To add and configure an SNMP view:

Select SNMP > Views in the navigation pane.

Click Add to create a new row in the SNMPv3 Views table.