Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼

Authenticated Clients

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

154

minutes. The default value is 60. The timeout value configured here has 
precedence over the value configured for the captive portal instance, unless 
the user value is set to 0. When set to 0, the timeout value configured for the 
CP instance is used.

•

Group Name—The assigned user group. Each CP instance is configured to 
support a particular group of users. 

•

Maximum Bandwidth Up—The maximum upload speed, in megabits per 
second, that a client can transmit traffic when using the captive portal. This 
setting limits the bandwidth used to send data into the network. The range 
is from 0 to 300 Mbps. The default is 0.

•

Maximum Bandwidth Down—The maximum download speed, in megabits 
per second, that a client can receive traffic when using the captive portal. 
This setting limits the bandwidth used to receive data from the network. The 
range is from 0 to 300 Mbps. The default is 0.

•

Delete User—Deletes the current user.

Click Save. The changes are saved to the Startup Configuration.

The Authenticated Clients page provides information about clients that have 
authenticated on any Captive Portal instance.

To view the list of authenticated clients, select Captive Portal > Authenticated 
Clients in the navigation pane.

•

MAC Address—The MAC address of the client.

•

IP Address—The IP address of the client.

•

User Name—The Captive Portal user name of the client.

•

Protocol—The protocol the user used to establish the connection (HTTP or 
HTTPS).

•

Verification—The method used to authenticate the user on the Captive 
Portal, which can be one of these values:

-

Guest—The user does not need to be authenticated by a database.