Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼

System Settings

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

29

The System Settings page enables you to configure information that identifies the 
WAP device within the network.

To configure system settings:

Select Administration > System Settings in the navigation pane.

Enter the parameters:

•

Host Name—Administratively assigned name for the WAP device. By 
convention, the name is the fully qualified domain name of the node. The 
default host name is wap concatenated with the last 6 hex digits of the MAC 
address of the WAP device. Host Name labels can contain only letters, digits 
and hyphens. Host Name labels cannot begin or end with a hyphen. No other 
symbols, punctuation characters, or blank spaces are permitted. The Host 
Name can be 1 to 63 characters long.

•

System Contact—A contact person for the WAP device. The System 
Contact can be 0 to 255 characters long and can include spaces and special 
characters.

•

System Location—Description of the physical location of the WAP device. 
The System Location can be 0 to 255 characters long and can include 
spaces and special characters.

Click Save. The changes are saved to the Startup Configuration.

One management user is configured on the WAP device by default:

•

User Name: cisco

•

Password: cisco

You can use the User Accounts page to configure up to four additional users and to 
change a user password.