Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼

Management Access Control

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

40

•

Certificate File Present

•

Certificate Expiration Date

•

Certificate Issuer Common Name

If an SSL certificate (with a .pem extension) exists on the WAP device, you can 
download it to your computer as a backup. In the Download SSL Certificate (From 
Device to PC) area, select HTTP or TFTP for the Download Method and click 
Download.

•

If you select HTTP, you are prompted to confirm the download and then to 
browse to the location to save the file on your network.

•

If you select TFTP, additional fields appear to enable you to enter the File 
Name to assign to the downloaded file, and enter the TFTP server address 
where the file will be downloaded.

You can also upload a certificate file (with a .pem extension) from your computer to 
the WAP device. In the Upload SSL Certificate (From PC to Device) area, select 
HTTP or TFTP for the Upload Method.

•

For HTTP, browse to the network location, select the file, and click Upload.

•

For TFTP, enter the File Name as it exists on the TFTP server and the TFTP 
Server IPv4 Address, then click Upload. The filename cannot contain the 
following characters: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *, and two or more 
successive periods.

A confirmation appears when the upload was successful.

You can create an access control list (ACL) that lists up to five IPv4 hosts and five 
IPv6 hosts that are authorized to access the WAP device configuration utility. If this 
feature is disabled, anyone can access the configuration utility from any network 
client by supplying the correct WAP device username and password.

If the management ACL is enabled, access through the web and SNMP is 
restricted to the specified IP hosts.