Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼

Quality of Service

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

96

-

Disabled—The set of clients in the APs BSS that can access the 
upstream network is not restricted to the clients specified in a MAC 
address list.

-

Local—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a locally defined MAC 
address list.

-

RADIUS—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a MAC address list on a 
RADIUS server.

If you select Local or RADIUS, see 

 for instructions on creating 

the MAC filter list.

•

VLAN ID—Configure the Access Point Interface with the same VLAN ID as 
advertised on the Infrastructure Client Interface.

Click Save. The changes are saved to the Startup Configuration.

The associated downstream clients now have connectivity to the upstream 
network.

The quality of service (QoS) settings provide you with the ability to configure 
transmission queues for optimized throughput and better performance when 
handling differentiated wireless traffic, such as Voice-over-IP (VoIP), other types of 
audio, video, streaming media, and traditional IP data.

To configure QoS on the WAP device, you set parameters on the transmission 
queues for different types of wireless traffic and specify minimum and maximum 
wait times (through contention windows) for transmission.

WAP Enhanced Distributed Channel Access (EDCA) parameters affect traffic 
flowing from the WAP device to the client station.

Station EDCA parameters affect traffic flowing from the client station to the WAP 
device.

In normal use, the default values for the WAP device and station EDCA should not 
need to be changed. Changing these values affects the QoS provided.

To configure WAP device and Station EDCA parameters: