Brother CM350 전단
3
Using Drawing Functions to Fill
Patterns/Make Outlines Thicker
Patterns/Make Outlines Thicker
Note
•
Depending on the material and pen being used,
material drawn with a filled pattern may be
difficult to peel off or may tear. Perform trial
drawing with the pattern to be used in your
project.
material drawn with a filled pattern may be
difficult to peel off or may tear. Perform trial
drawing with the pattern to be used in your
project.
Memo
•
An open pattern cannot be filled.
Example:
Example:
•
When fill settings are specified, the button
appears as
, and the settings are applied to
all patterns in the pattern layout screen.
•
If
appears in the pattern piece editing
screen, only outline settings will be specified.
•
Fill and outline settings cannot both be
specified for the same pattern.
specified for the same pattern.
■ Filling Patterns
a
Touch
in the pattern piece editing screen.
• The fill settings can also be specified in the pattern
editing screen. Specify fill settings for characters in
the pattern editing screen.
the pattern editing screen.
b
Touch the “Set” key to add the pattern to the
pattern layout screen.
pattern layout screen.
c
Touch the “OK” key to display the draw/cut
selection screen.
selection screen.
• For details on the drawing functions, see
“DRAWING FUNCTIONS” in the Operation
Manual.
Manual.
d
Touch
to display the fill settings screen.
These settings can also be specified with “Fill /
Additional Line” on page 4 of the settings screen
Additional Line” on page 4 of the settings screen
(displayed by pressing
in the operation panel).
Settings screen
a Fill Pattern
Touch
, and then select the fill pattern.
b Fill Line Spacing
Adjust the spacing of the lines filling the pattern.
c Fill Direction
Adjust the direction of the fill pattern.
a
b
c