Miele KWT 1613 Vi 사양 가이드
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
Page 3 of 12
Side-by-Side Merging Kit
KSK 1002
KSK 1002
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
The minimum thickness of the partition
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
HEATING MAT TRANSFORMER
PLUG DETAILS
PLUG DETAILS
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4
less than 6
3
/
4
” (160 mm)
In this case, you will ony need the
heating mat from the “Merging kit” to
avoid condenstaion and prevent
damages.
Electric: 9 foot- 120Volt- 15Amp 2-wire molded plug
power supply
Note: Niche depth under 25” (635 mm) will require
the location of the Electrical outlet(s) to be in
adjacent cabinetry
Specification Sheets TR 07282016