Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät 사용자 설명서
Wireless network setup
178
2. Using a Network-Connected Machine
Connecting WPS
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
If the machine is connected to a wired network, then you cannot connect to
it using the WPS feature. If a network cable is plugged into the network port,
remove it from the network port.
it using the WPS feature. If a network cable is plugged into the network port,
remove it from the network port.
Connecting in PBC mode
1
Select (Menu) > Network > Wi-Fi > WPS on the control panel.
OR
For models that have the touch screen on the control panel, press
(Setup) > Machine Setup > Next > Network Setup > Wi-Fi > WPS.
2
Press Connect via PBC.
3
Press OK or Yes when the confirmation window appears.
Information window appears showing 2 minutes connection processing
time.
time.
4
Press the WPS (PBC) button on the access point (or wireless router).
The messages are displayed on the display screen in the order below:
a Connecting:
The machine is connecting to the access point (or
wireless router).
b Connected:
When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c Network
Name(SSID):
After completing the wireless network
connection process, the AP’s SSID information appears on the
display.
display.
5
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
instructions in the window to set up the wireless network.
Connecting in PIN mode
1
Select (Menu) > Network > Wi-Fi > WPS on the control panel.
OR
For models that have the touch screen on the control panel, press
(Setup) > Machine Setup > Next > Network Setup > Wi-Fi > WPS.
2
Press Connect via PIN.
3
Press OK or Yes when the confirmation window appears.