Samsung WD0804W8E 빠른 설정 가이드

TRY THE FOLLOWING...

When the door does 
not open

The door does not open when the temperature inside your washing machine is 
high or when the tub is filled with water.

•  When the internal air temperature after a wash is higher than 70 °C or the water 

temperature is more than 55 °C. 
Wait until the internal temperature has dropped.

•  When the tub is filled with water.

➲ 

Select Spin to drain the water. Then you will be able to open the door.  
For some models, you can open door when “End” is displayed or the end 
melody is played.

✔ 

If you open the door by force, it may result in damage to the product or safety 
issues.

When selecting the 
Dry function

For the Drying capacity, 1/3 of the wash capacity is reasonable. The maximum 
drying rate is 95%.

•  If you insert more than the maximum drying capacity specified in the user 

manual, the drying performance may decrease. 
Remove and shake out the laundry. Heat and moisture is removed and the 
laundry will be dry.

When inserting 
fabric softener

If fabric softener is inserted above the reference line (MAX) of the 
fabric softener compartment, fabric softener may enter directly 
into the tub.

•  Insert fabric softener only up to the reference line (MAX) so 

that it does not overflow.

If the rinse cap (hereafter cap) is not inserted correctly or there 
is foreign material in the cap when using concentrated fabric 
softener (liquid fabric softener of a high viscosity), fabric softener 
or water may remain.

•  Check whether the cap is correctly inserted into the detergent 

compartment where the fabric softener is inserted.

•  Open the detergent compartment and press the removal 

button inside. Remove and clean it.

When the wash time 
increases

The wash time may increase if an unbalance is detected with the load, the 
machine will automatically try to balance the load. This process may extend 
the wash program time.

•  Press the Start/Pause button and then check the laundry status. Spread the 

laundry evenly and perform the course again.

SELF-TEST

✔ 

If any error message other than the following error messages is displayed, refer to the user manual.

Indication

Symptom

Action

When the door is 
opened

Is the door opened?
➲ 

Make sure to operate your washing machine after closing the 
door.

When no water is 
supplied

Is the tap closed?
➲ 

Turn on the tap.

Is the filter net of the water supply hose connector blocked?
➲ 

Remove and clean the filter net of the water supply hose.

When the water does 
not drain

Is the drain filter blocked?
➲ 

Clean the drain filter.

Is the washing machine frozen because of the cold weather?
➲ 

Add hot water into the tub and let it defrost for about one hour.

When the internal 
temperature of the 
drum is high

Did the washing machine pause while drying or performing an air 
wash?
➲ 

The cooling fan operates automatically. Therefore wait until the 
‘Hot’ indication disappears.

✔ 

Only the Power and Start/Pause buttons operate while the ‘Hot’ 
indication displays.

✔ 

When the internal temperature of the drum is high, the door 
does not open. If you open the door by force, it may result in 
product damage and safety issues. Therefore wait until the 
temperature has dropped.

When water does not 
drain because the 
internal temperature 
does not drop below 
55 °C even if thirty 
minutes has passed 
after the wash has 
finished

Have the cold and hot water supply hoses been mixed up?
➲ 

Connect the cold and hot water supply hoses correctly.

✔ 

Operate your washing machine again by pressing the Start/
Pause button.

Rinse 

cap

MAX

DC68-02209B_EN_DE_FR_ES_IT_PT_RU.indd   2

2008-03-19   ¿ÀÈÄ 3:03:51