Samsung SMART Signage DM75E-BR LED 사용자 설명서

23

 

― The colour and shape of parts may differ from what is shown. Specifications are 

subject to change without notice to improve quality.

 

― Model DM82E-BR is only supported.

RGB / DVI /

HDMI / AV /

COMPONENT

AUDIO IN

AUDIO

OUT

RS232C

OUT

RS232C IN

SD CARD

DVI /

MAGICINFO IN

HDMI IN 1 

HDMI IN 2 

DP IN

IR /

AMBIENT

SENSOR IN

TRAY IN

RJ45

RGB IN

COMPONENT IN

IR

OUT

TOUCH OUT

USB

(5V 1A)

(5V 1A) /

TOUCH IN

USB

Connects to MDC using an RS232C adapter.

Supplies power to the external sensor board or receives the light sensor signal.

Receives sound from a PC via an audio cable.

Connects to the audio of a source device.

Connect to an SD memory card.

Connect to a USB memory device.

 

― The USB ports on the product accept a maximum constant current of 1A. If the 

maximum value is exceeded, USB ports may not work.

USB 

 (5V 1A): Connects to a USB device. Make sure the Touch is not in use.

TOUCH IN: This must be connected to the cable if the Touch is in use.

DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box (sold 
separately).

Connects to a PC using a DP cable.

Connects to a source device using an HDMI cable.

Connects to the Tray, found on the front of the product, using the OCM cable.

Connects to a source device using a D-SUB cable.

Connects the Touch to a PC.

Connects to a source device using the AV/Component adapter.

Receives the remote control signal via the external sensor board and outputs the signal via 
LOOP OUT.

Connects to MDC using a LAN cable.