Argosy HV339T 사용자 설명서

1.  Use a RJ45 Ethernet cable to connect this device to a network router, hub, or switch; or 

connect this device to the Ethernet port on a networked computer. 

2.  If you have not already done so, connect this device to your TV. 

3.  Connect the power supply to this device. 

4.  Press the Power Switch on the front panel to turn on this device, or press the 

 

STANDBY button on the remote control to activate this device. The LED on the front 

cover will light up during booting-up. This device will be ready to use when the LED lights 

up steadily. 

5.  This device is automatically configured so you can browse and play back files stored on 

your network volumes. If you want to copy files from your network volumes to this 

device, you need to connect to it using a computer on the network. 

 

 Note:

 

This device only supports wireless dongle with Realtek RTL8187B/RTL8192/ 

RTL8191SU controller. Please consult your local distributor or vendor website 

for a certified USB wireless dongle. 

1.  Connect the wireless dongle to the USB host port. 

2.  If you have not already done so, connect this device to your TV. 

3.  Turn on your TV and change the input setting as needed to receive input from this device. 

Refer to the manual that came with the TV if you are uncertain how to do this. 

4.  Connect the power supply to this device. 

5.  Press the Power Switch on the front panel to turn on this device, or press the 

 

STANDBY button on the remote control to activate this device. 

6.  When the Home Menu displays on the TV, select Setup and press the 

  ENTER 

button. 

7.  Select Network and press the 

  ENTER button. 

8