Elac 31187 전단
2
•
Due to the double flare design of the bass port, flow noise, even
at high levels, is eliminated.
at high levels, is eliminated.
•
A two-part bass
control plug is
provided that can
partially or fully close
the port, so the
system can be
adjusted for the room
acoustics and
speaker placement.
provided that can
partially or fully close
the port, so the
system can be
adjusted for the room
acoustics and
speaker placement.
•
To optimise the sound there are individual crossover networks for the high and low frequencies,
which can be bi-wired using two pairs of cable or alternatively, for optimum performance, two am-
plifiers can be used in a bi-amped situation. Good contact is guaranteed by large, gold plated
speaker terminals, which are fully insulated to protect against short circuits. The crossover net-
work is equipped with an overload protection circuit.
plifiers can be used in a bi-amped situation. Good contact is guaranteed by large, gold plated
speaker terminals, which are fully insulated to protect against short circuits. The crossover net-
work is equipped with an overload protection circuit.
Finishes: silver, titan, cherry, black
Specifications
ELAC CC 121
Dimensions H x W x D
175 x 435 x 270(285) mm
Crossover frequency
550/2500 Hz
Weight
8.2 kg
Nominal / Peak Power
Handling
Handling
80 W/120 W
Type
2 1/2 way, bass reflex
Frequency Range
44-25000 Hz
Woofer
2 x 140 mm AS cone, magn.
shielded
shielded
Sensitivity
89 dB/2.8V/m
Tweeter
1 x HT 25 KST V, magn. shielded Nominal impedance
4 ohm
Midrange
Minimum impedance
3.6 ohm at 190 Hz
Recom. Amplifier Power
at Nominal Impedance
at Nominal Impedance
30-180 W/channel